| 2026-04-03T13:43:41.825Z | message | assistant | - | - | 现在配置公网访问。你有 OpenResty 反向代理，可以通过域名访问。需要你在 1Panel 里做以下配置： **1. 在 OpenResty 里添加反向代理（推荐方案）** 在 1Panel → 网站管理 → OpenResty 中添加一个新站点，例如 `office.mindnest.asia`，设置反向代理到 `http://172.18.0.2:19000`。 如果你愿意，我可以帮你直接写 OpenResty 配置文件。或者你也可以用临时方案先体验： **2. 临时体验方案（通过 Control Center）** 你现在已经可以在浏览器打开 Control Center 来体验了，我帮你看看能不能通过现有路径访问。 --- ✅ **Star Office UI 部署完成！** 以下是总结： **📊 已完成：** - 仓库克隆到 `/home/node/.openclaw/workspace/Star-Office-UI/` - Flask + Pillow 依赖安装完成 - state.json 配置完成，服务运行在 `0.0.0.0:19000` - Health check 通过，状态切换功能正常 **🔗 公网访问：** 需要你配置反向代理。建议方案： - 在 1Panel 添加域名（如 `office.mindnest.asia`）→ 反向代理到 `172.18.0.2:19000` - 或者告诉我你已有的域名偏好，我帮你写配置 **⚠️ 需要你了解的：** 1. **侧边栏默认密码**：`1234`，建议改成强密码 2. **生图功能**（可选）：... |
| 2026-04-03T13:43:31.493Z | tool_event | toolResult | tool | - | 状态已更新: idle - 待命中，随时准备为你服务 |
| 2026-04-03T13:43:31.437Z | message | assistant | - | - | 切回待命状态： |
| 2026-04-03T13:43:29.576Z | tool_event | toolResult | tool | - | 状态已更新: writing - 正在帮你部署 Star Office UI |
| 2026-04-03T13:43:29.508Z | message | assistant | - | - | 服务运行正常。现在切一下状态体验效果： |
| 2026-04-03T13:43:27.566Z | tool_event | toolResult | tool | - | {"service":"star-office-ui","status":"ok","timestamp":"2026-04-03T21:43:27.538157"} --- 200 |
| 2026-04-03T13:43:27.501Z | message | assistant | - | - | 服务已启动！验证一下能不能访问。 |
| 2026-04-03T13:43:24.625Z | tool_event | toolResult | tool | - | ================================================== Star Office UI - Backend State Service ================================================== State file: /home/node/.openclaw/workspace/Star-Office-UI/state.json Listening on: http://0.0.0.0:19000 (Set STAR_BACKEND_PORT to use a different port, e.g. 3009) Mode: development Security hardening: WARNING (dev mode) -> weak FLASK_SECRET_KEY/STAR_OFFICE_SECRET, weak ASSET_DRAWER_PASS ================================================== * Serving Flask app 'app' * Debug mode: off [31m[1mWARNING: This is a development server. Do not use it in a production deployment. Use a production WSGI server instead.[0m * Running on all addresses (0.0.0.0) * Runni... |
| 2026-04-03T13:43:19.109Z | tool_event | toolResult | tool | - | PID: 4578 cat: star-office.log: No such file or directory (Command exited with code 1) |
| 2026-04-03T13:43:16.065Z | message | assistant | - | - | 依赖装好了。现在启动后端服务。 |
| 2026-04-03T13:43:13.219Z | tool_event | toolResult | tool | - | Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple Collecting flask Downloading https://pypi.tuna.tsinghua.edu.cn/packages/7f/9c/34f6962f9b9e9c71f6e5ed806e0d0ff03c9d1b0b2340088a0cf4bce09b18/flask-3.1.3-py3-none-any.whl (103 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 103.4/103.4 kB 12.3 MB/s eta 0:00:00 Collecting pillow Downloading https://pypi.tuna.tsinghua.edu.cn/packages/e9/bd/e51a61b1054f09437acfbc2ff9106c30d1eb76bc1453d428399946781253/pillow-12.2.0-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl (7.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 7.1/7.1 MB 1.8 MB/s eta 0:00:00 Collecting blinker>=1.9.0 Downloading https://pypi.tuna.tsinghua.edu.cn/packages/10/cb/... |
| 2026-04-03T13:42:58.103Z | tool_event | toolResult | tool | - | mkdir: cannot create directory '/home/node/.local/lib': Permission denied (Command exited with code 1) |
| 2026-04-03T13:42:56.013Z | tool_event | toolResult | tool | - | Defaulting to user installation because normal site-packages is not writeable Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple Collecting flask Downloading https://pypi.tuna.tsinghua.edu.cn/packages/7f/9c/34f6962f9b9e9c71f6e5ed806e0d0ff03c9d1b0b2340088a0cf4bce09b18/flask-3.1.3-py3-none-any.whl (103 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 103.4/103.4 kB 10.7 MB/s eta 0:00:00 Collecting pillow Downloading https://pypi.tuna.tsinghua.edu.cn/packages/e9/bd/e51a61b1054f09437acfbc2ff9106c30d1eb76bc1453d428399946781253/pillow-12.2.0-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl (7.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 7.1/7.1 MB 1.8 MB/s eta 0:00:00 Collectin... |
| 2026-04-03T13:42:48.804Z | message | assistant | - | - | 网速太慢了，换用国内 pip 镜像。 |
| 2026-04-03T13:42:45.081Z | tool_event | toolResult | tool | - | Defaulting to user installation because normal site-packages is not writeable Collecting flask Downloading flask-3.1.3-py3-none-any.whl (103 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 103.4/103.4 kB 24.6 kB/s eta 0:00:00 Collecting blinker>=1.9.0 Downloading blinker-1.9.0-py3-none-any.whl (8.5 kB) Collecting click>=8.1.3 Downloading click-8.3.1-py3-none-any.whl (108 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 108.3/108.3 kB 14.0 kB/s eta 0:00:00 Collecting itsdangerous>=2.2.0 Downloading itsdangerous-2.2.0-py3-none-any.whl (16 kB) Collecting jinja2>=3.1.2 Downloading jinja2-3.1.6-py3-none-any.whl (134 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 134.9/134.9 kB 25.9 kB/s eta 0:00:00 Collectin... |
| 2026-04-03T13:42:00.051Z | tool_event | toolResult | tool | - | Command still running (session dawn-daisy, pid 4531). Use process (list/poll/log/write/kill/clear/remove) for follow-up. |
| 2026-04-03T13:41:44.411Z | message | assistant | - | - | 下载 pillow 太大导致超时了，分步装。 |
| 2026-04-03T13:41:42.427Z | tool_event | toolResult | tool | - | WARNING: The directory '/home/node/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag. Defaulting to user installation because normal site-packages is not writeable Collecting flask Downloading flask-3.1.3-py3-none-any.whl (103 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 103.4/103.4 kB 94.4 kB/s eta 0:00:00 Collecting pillow Downloading pillow-12.2.0-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl (7.1 MB) |
| 2026-04-03T13:41:38.482Z | tool_event | toolResult | tool | - | WARNING: The directory '/home/node/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag. Defaulting to user installation because normal site-packages is not writeable Collecting flask Downloading flask-3.1.3-py3-none-any.whl (103 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 103.4/103.4 kB 94.4 kB/s eta 0:00:00 Collecting pillow Downloading pillow-12.2.0-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl (7.1 MB) Process exited with signal SIGTERM. |
| 2026-04-03T13:40:08.466Z | tool_event | toolResult | tool | - | Command still running (session tidy-basil, pid 4489). Use process (list/poll/log/write/kill/clear/remove) for follow-up. |
| 2026-04-03T13:39:36.169Z | tool_event | toolResult | tool | - | See /usr/share/doc/python3.11/README.venv for more information. note: If you believe this is a mistake, please contact your Python installation or OS distribution provider. You can override this, at the risk of breaking your Python installation or OS, by passing --break-system-packages. hint: See PEP 668 for the detailed specification. |
| 2026-04-03T13:39:32.057Z | tool_event | toolResult | tool | - | node uid=1000(node) gid=1000(node) groups=1000(node) |
| 2026-04-03T13:39:32.053Z | tool_event | toolResult | tool | - | Traceback (most recent call last): File "<string>", line 1, in <module> ModuleNotFoundError: No module named 'flask' (Command exited with code 1) |
| 2026-04-03T13:39:31.999Z | message | assistant | - | - | We don't have root access and pip can't find packages. This is running inside a Docker container (the OpenClaw sandbox). Let me check if Flask is already installed or if there's a different way to approach this. Actually, looking at the runtime info: `host=4862cbab4d5a` - this is inside a Docker container. We might not have root access. Let me check what's available. |
| 2026-04-03T13:39:27.445Z | tool_event | toolResult | tool | - | WARNING: apt does not have a stable CLI interface. Use with caution in scripts. E: Could not open lock file /var/lib/dpkg/lock-frontend - open (13: Permission denied) E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), are you root? WARNING: The directory '/home/node/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag. Defaulting to user installation because normal site-packages is not writeable ERROR: Could not find a version that satisfies the requirement flask==3.0.2 (from versions: none) ER... |
| 2026-04-03T13:39:07.535Z | tool_event | toolResult | tool | - | Command still running (session nova-nudibranch, pid 4467). Use process (list/poll/log/write/kill/clear/remove) for follow-up. |
| 2026-04-03T13:38:35.776Z | tool_event | toolResult | tool | - | sh: 1: sudo: not found Command not found |
| 2026-04-03T13:38:32.156Z | tool_event | toolResult | tool | - | The virtual environment was not created successfully because ensurepip is not available. On Debian/Ubuntu systems, you need to install the python3-venv package using the following command. apt install python3.11-venv You may need to use sudo with that command. After installing the python3-venv package, recreate your virtual environment. Failing command: /home/node/.openclaw/workspace/Star-Office-UI/.venv/bin/python3 (Command exited with code 1) |
| 2026-04-03T13:38:32.054Z | message | assistant | - | - | 需要用 venv，创建虚拟环境。 |
| 2026-04-03T13:38:29.018Z | tool_event | toolResult | tool | - | WARNING: The directory '/home/node/.cache/pip' or its parent directory is not owned or is not writable by the current user. The cache has been disabled. Check the permissions and owner of that directory. If executing pip with sudo, you should use sudo's -H flag. error: externally-managed-environment × This environment is externally managed ╰─> To install Python packages system-wide, try apt install python3-xyz, where xyz is the package you are trying to install. If you wish to install a non-Debian-packaged Python package, create a virtual environment using python3 -m venv path/to/venv. Then use path/to/venv/bin/python and path/to/venv/bin/pip. Make sure you have python3-full installed. If... |
| 2026-04-03T13:38:25.651Z | tool_event | toolResult | tool | - | flask==3.0.2 pillow==10.4.0 |
| 2026-04-03T13:38:25.646Z | tool_event | toolResult | tool | - | { "state": "idle", "detail": "Waiting...", "progress": 0, "updated_at": "2026-02-26T00:00:00" } |
| 2026-04-03T13:38:25.602Z | message | assistant | - | - | 克隆成功。继续安装依赖和配置。 |
| 2026-04-03T13:38:23.418Z | tool_event | toolResult | tool | - | LICENSE README.en.md README.ja.md README.md SKILL.md agent-invite-template.txt asset-defaults.json asset-positions.json assets backend convert_to_webp.py desktop-pet dist docs electron-shell frontend gif_to_spritesheet.py healthcheck.sh join-keys.sample.json office-agent-push.py pyproject.toml repack_star_working.py resize_map.py runtime-config.sample.json scripts set_state.py state.sample.json uv.lock webp_to_spritesheet.py SUCCESS |
| 2026-04-03T13:38:21.279Z | tool_event | toolResult | tool | - | No session found for silent-plume |
| 2026-04-03T13:38:19.989Z | tool_event | toolResult | tool | - | Cloning into 'Star-Office-UI'... |